performance measurements
Each table row shows performance measurements for this Cython program with a particular command-line input value N.
| N | CPU secs | Elapsed secs | Memory KB | Code B | ≈ CPU Load |
|---|---|---|---|---|---|
| 10 | 0.58 | 0.58 | 9,072 | 2467 | 100% 2% 0% 0% 2% 0% 2% 0% |
Read the ↓ make, command line, and program output logs to see how this program was run.
Read richards benchmark to see what this program should do.
notes
richards Cython program source code
# based on a Java version:
# Based on original version written in BCPL by Dr Martin Richards
# in 1981 at Cambridge University Computer Laboratory, England
# and a C++ version derived from a Smalltalk version written by
# L Peter Deutsch.
# Java version: Copyright (C) 1995 Sun Microsystems, Inc.
# Translation from C++, Mario Wolczko
# Outer loop added by Alex Jacoby
# Task IDs
cdef int I_IDLE, I_WORK, I_HANDLERA, I_HANDLERB, I_DEVA, I_DEVB, K_DEV, K_WORK, BUFSIZE
I_IDLE = 1
I_WORK = 2
I_HANDLERA = 3
I_HANDLERB = 4
I_DEVA = 5
I_DEVB = 6
# Packet types
K_DEV = 1000
K_WORK = 1001
# Packet
BUFSIZE = 4
BUFSIZE_RANGE = range(BUFSIZE)
class Packet(object):
def __init__(self,l,int i, int k):
self.link = l
self.ident = i
self.kind = k
self.datum = 0
self.data = [0] * BUFSIZE
def append_to(self,lst):
self.link = None
if lst is None:
return self
else:
p = lst
next = p.link
while next is not None:
p = next
next = p.link
p.link = self
return lst
# Task Records
class TaskRec(object):
pass
class DeviceTaskRec(TaskRec):
def __init__(self):
self.pending = None
class IdleTaskRec(TaskRec):
def __init__(self):
self.control = 1
self.count = 10000
class HandlerTaskRec(TaskRec):
def __init__(self):
self.work_in = None
self.device_in = None
def workInAdd(self,p):
self.work_in = p.append_to(self.work_in)
return self.work_in
def deviceInAdd(self,p):
self.device_in = p.append_to(self.device_in)
return self.device_in
class WorkerTaskRec(TaskRec):
def __init__(self):
self.destination = I_HANDLERA
self.count = 0
# Task
class TaskState(object):
def __init__(self):
self.packet_pending = True
self.task_waiting = False
self.task_holding = False
def packetPending(self):
self.packet_pending = True
self.task_waiting = False
self.task_holding = False
return self
def waiting(self):
self.packet_pending = False
self.task_waiting = True
self.task_holding = False
return self
def running(self):
self.packet_pending = False
self.task_waiting = False
self.task_holding = False
return self
def waitingWithPacket(self):
self.packet_pending = True
self.task_waiting = True
self.task_holding = False
return self
def isPacketPending(self):
return self.packet_pending
def isTaskWaiting(self):
return self.task_waiting
def isTaskHolding(self):
return self.task_holding
def isTaskHoldingOrWaiting(self):
return self.task_holding or (not self.packet_pending and self.task_waiting)
def isWaitingWithPacket(self):
return self.packet_pending and self.task_waiting and not self.task_holding
cdef int layout, TASKTABSIZE
tracing = False
layout = 0
def trace(a):
global layout
layout -= 1
if layout <= 0:
print
layout = 50
print(a, end='')
TASKTABSIZE = 10
class TaskWorkArea(object):
def __init__(self):
self.taskTab = [None] * TASKTABSIZE
self.taskList = None
self.holdCount = 0
self.qpktCount = 0
taskWorkArea = TaskWorkArea()
class Task(TaskState):
def __init__(self,int i, int p,w,initialState,r):
self.link = taskWorkArea.taskList
self.ident = i
self.priority = p
self.input = w
self.packet_pending = initialState.isPacketPending()
self.task_waiting = initialState.isTaskWaiting()
self.task_holding = initialState.isTaskHolding()
self.handle = r
taskWorkArea.taskList = self
taskWorkArea.taskTab[i] = self
def fn(self,pkt,r):
raise NotImplementedError
def addPacket(self,p,old):
if self.input is None:
self.input = p
self.packet_pending = True
if self.priority > old.priority:
return self
else:
p.append_to(self.input)
return old
def runTask(self):
if self.isWaitingWithPacket():
msg = self.input
self.input = msg.link
if self.input is None:
self.running()
else:
self.packetPending()
else:
msg = None
return self.fn(msg,self.handle)
def waitTask(self):
self.task_waiting = True
return self
def hold(self):
taskWorkArea.holdCount += 1
self.task_holding = True
return self.link
def release(self,int i):
t = self.findtcb(i)
t.task_holding = False
if t.priority > self.priority:
return t
else:
return self
def qpkt(self,pkt):
t = self.findtcb(pkt.ident)
taskWorkArea.qpktCount += 1
pkt.link = None
pkt.ident = self.ident
return t.addPacket(pkt,self)
def findtcb(self,int id):
t = taskWorkArea.taskTab[id]
if t is None:
raise Exception("Bad task id %d" % id)
return t
# DeviceTask
class DeviceTask(Task):
def __init__(self,int i,int p,w,s,r):
Task.__init__(self,i,p,w,s,r)
def fn(self,pkt,r):
d = r
assert isinstance(d, DeviceTaskRec)
if pkt is None:
pkt = d.pending
if pkt is None:
return self.waitTask()
else:
d.pending = None
return self.qpkt(pkt)
else:
d.pending = pkt
if tracing: trace(pkt.datum)
return self.hold()
class HandlerTask(Task):
def __init__(self,int i,int p,w,s,r):
Task.__init__(self,i,p,w,s,r)
def fn(self,pkt,r):
h = r
assert isinstance(h, HandlerTaskRec)
if pkt is not None:
if pkt.kind == K_WORK:
h.workInAdd(pkt)
else:
h.deviceInAdd(pkt)
work = h.work_in
if work is None:
return self.waitTask()
count = work.datum
if count >= BUFSIZE:
h.work_in = work.link
return self.qpkt(work)
dev = h.device_in
if dev is None:
return self.waitTask()
h.device_in = dev.link
dev.datum = work.data[count]
work.datum = count + 1
return self.qpkt(dev)
# IdleTask
class IdleTask(Task):
def __init__(self,int i,int p,w,s,r):
Task.__init__(self,i,0,None,s,r)
def fn(self,pkt,r):
i = r
assert isinstance(i, IdleTaskRec)
i.count -= 1
if i.count == 0:
return self.hold()
elif int(i.control) & 1 == 0:
i.control /= 2
return self.release(I_DEVA)
else:
i.control = int(i.control/2) ^ 0xd008
return self.release(I_DEVB)
# WorkTask
A = ord('A')
class WorkTask(Task):
def __init__(self,int i,int p,w,s,r):
Task.__init__(self,i,p,w,s,r)
def fn(self,pkt,r):
w = r
assert isinstance(w, WorkerTaskRec)
if pkt is None:
return self.waitTask()
if w.destination == I_HANDLERA:
dest = I_HANDLERB
else:
dest = I_HANDLERA
w.destination = dest
pkt.ident = dest
pkt.datum = 0
for i in BUFSIZE_RANGE: # xrange(BUFSIZE)
w.count += 1
if w.count > 26:
w.count = 1
pkt.data[i] = A + w.count - 1
return self.qpkt(pkt)
import time
def schedule():
t = taskWorkArea.taskList
while t is not None:
pkt = None
if tracing:
print("tcb =", t.ident)
if t.isTaskHoldingOrWaiting():
t = t.link
else:
if tracing: trace(chr(ord("0")+t.ident))
t = t.runTask()
class Richards(object):
def run(self, int iterations):
cdef int i
for i in range(iterations):
taskWorkArea.holdCount = 0
taskWorkArea.qpktCount = 0
IdleTask(I_IDLE, 1, 10000, TaskState().running(), IdleTaskRec())
wkq = Packet(None, 0, K_WORK)
wkq = Packet(wkq , 0, K_WORK)
WorkTask(I_WORK, 1000, wkq, TaskState().waitingWithPacket(), WorkerTaskRec())
wkq = Packet(None, I_DEVA, K_DEV)
wkq = Packet(wkq , I_DEVA, K_DEV)
wkq = Packet(wkq , I_DEVA, K_DEV)
HandlerTask(I_HANDLERA, 2000, wkq, TaskState().waitingWithPacket(), HandlerTaskRec())
wkq = Packet(None, I_DEVB, K_DEV)
wkq = Packet(wkq , I_DEVB, K_DEV)
wkq = Packet(wkq , I_DEVB, K_DEV)
HandlerTask(I_HANDLERB, 3000, wkq, TaskState().waitingWithPacket(), HandlerTaskRec())
wkq = None;
DeviceTask(I_DEVA, 4000, wkq, TaskState().waiting(), DeviceTaskRec());
DeviceTask(I_DEVB, 5000, wkq, TaskState().waiting(), DeviceTaskRec());
schedule()
if taskWorkArea.holdCount == 9297 and taskWorkArea.qpktCount == 23246:
pass
else:
return False
return True
def entry_point(int iterations):
r = Richards()
startTime = time.time()
result = r.run(iterations)
endTime = time.time()
return result, startTime, endTime
def main(entry_point = entry_point, int iterations = 10):
result, startTime, endTime = entry_point(iterations)
if not result:
print("Incorrect results!")
return -1
print(iterations)
print("finished.")
return 42
import sys
if len(sys.argv) >= 2:
main(iterations = int(sys.argv[1]))
else:
main()
make, command-line, and program output logs
Sun, 23 Apr 2023 09:39:10 GMT MAKE: make[1]: Vstupuje se do adresáře „/home/dundee/work/pybenchmarks/bencher/tmp/richards/tmp“ cp richards.cython `echo richards.cython | sed 's/cython-..//' | sed 's/.cython//'`.pyx cythonize -3 -bi `echo richards.cython | sed 's/cython-..//' | sed 's/.cython//'`.pyx Compiling /home/dundee/work/pybenchmarks/bencher/tmp/richards/tmp/richards.pyx because it changed. [1/1] Cythonizing /home/dundee/work/pybenchmarks/bencher/tmp/richards/tmp/richards.pyx make[1]: Opouští se adresář „/home/dundee/work/pybenchmarks/bencher/tmp/richards/tmp“ 6.32s to complete and log all make actions COMMAND LINE: /usr/bin/python3 -c "import richards" 10 PROGRAM OUTPUT: 10 finished.